General Purpose Analog & Digital Lab

Model No:

DE-01

Romtek® is the registered trade mark of Bhushan & Bhushan

Short Description

Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc. On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation. Power Supplies : 5V +1 %, +15V + 1%, Regulated Clock : 1Hz to 1MHz in appropriate ranges Hi-Lo Switches : 16 Nos. LED Indicators : 16 Nos. 7 Segment display : 3 Nos. with built-in Decoders & BCD I/P 7 segment display : 1 No. with separate 7446 decoder 'CMOS' Option : 750 DLI with CMOS IC's. GENERAo permits bread board Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc. On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation.Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc. On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation. Power Supplies : 5V +1 %, +15V + 1%, Regulated Clock : 1Hz to 1MHz in appropriate ranges Hi-Lo Switches : 16 Nos. LED Indicators : 16 Nos. 7 Segment display : 3 Nos. with built-in Decoders & BCD I/P 7 segment display : 1 No. with separate 7446 decoder 'CMOS' Option : 750 DLI with CMOS IC's. GENERAo permits bread board Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc. On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation.

Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc.  On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation.Analog & Digital Lab is self-contained equipment, designed to perform practicals on all digital and linear circuits. It alsModel 750 DLI has been designed to cover the syllabus of Digital Electronics as applicable to Diploma courses in the country. The equipment consists of +5V and +15 V supplies, clock, Hi Lo switches, LED Indicators,7 segment displays and several integrated Circuits such as Gates, Flip Flops, counters, shift Registers, coders and Encoders, Buffers, A-D and D-A converters, expanders, Schmitt Triggers etc.  On the back of the panel, the electronic circuit is wired. The sockets used for insertion of the patch cords are also soldered on the PCB. This has resulted in a very high degree of reliability. The Trainer requires 230/115V ac for operation.

  

  

Input    

:

230V/115V, 50Hz A.C. Single phase.

Built - in           

:

Suitable Power Supplies are provided in the Trainer

Breadboard

:

Provided  with  solder less Breadboards having  1280  tie  points  and  400 distribution  points , in combination of 40  terminal strip tie  points & capable of  accepting  0.56 mm (24 SWG) single strand wire for interconnections.      

Logic Level Switches

:

10 Nos. of Logic level switches.

Logic Level Indicators

:

10 Nos. x 2color LED's to indicate Logic Levels.

Clock

:

Clock selection is provided for 10MHz,1MHz, 100KHz, 10KHz, 1KHz, 100Hz,1Hz and  0.1Hz  with   outputs  available at  the receptacles.

Logic Pulser     

:

Manual NO/NC switch with debounced circuitry is provided   for High / Low going pulse.

Meter

:

A 3 1/2 digit LCD meter is provided.

LED Seven

:

4 Nos.  of 7  segment   displays  , with corresponding    decoders    to   accept BCD inputs  are  provided. The BCD inputs are available on the front panel.

7segment lines are also provided on the front panel.

Function  Generator           

:

A   function Generator,   generating Sine, Square & Triangular wave having frequencies from 1Hz -10KHz is provided.

Logic Probe

:

Logic Probe to detect High/Low Levels & pulses   up to 1MHz (50% duty cycle) is provided.

IC's

:

A  set  of   IC's  containing   AND, OR, NOT,  NAND, NOR,  Counter, Shift Register, Tri State Buffer, ADC-DAC is provided.

Wire Interconnect

:

Single strand suitable gauge coils of 5 different     colors are supplied.